Interior Stripping, No Sanding – So Easy!
Any Paint – Any Varnish – Any Surface
Welcome to Cooper’s Strip Club, manufacturers and suppliers of what we believe to be the world’s best stripping products, advice & back up support.
100’s of Projects
No Sanding – So Easy!
With Coopers you’ll get the results you always wanted without the pain of sanding, why sand when the person who made your project sanded it for you? Simply dissolve the old finish with Cooper’s Stripper then rinse the surface clean with Cooper’s Flusher.
The result is a surface where the character (Patina) remains undamaged, unbleached or removed, which is exactly what a new finish needs if it going to look amazing.
With Coopers you’ll produce a surface that’s Clean, Dry and Absorbent, which is exactly what a new finish needs if it is to survive.
10 Reasons to use Cooper's
- No Sanding
- Strips Any Paint, Any Varnish
- Easy to Use
- Low Odour
- Non-Caustic
- Safe Lead Removal
- Economical
- Saves Time
- No Vibration / Silent
- No toxic Dust
No Grain Raising
The Cooper’s System does not raise the grain due to there being no water in the Cooper’s Products or in the stripping process.
Any Paint - Any Varnish
Coopers has been used for Interior stripping for nearly 40 years, where you can safely and easily strip Lead Paint, Enamel Paint, Acrylic Paint, Two Pack Paint, Powder Coating, Polyurethane, Moisture Cured Urethane, Lacquer, varnish, Shellac, French Polish, Tung Oil, Danish Oil, Stain, even Floor Glue.
Any Surface
Strip any of these finishes from any solid timber including Kauri, Rimu, Totara, Matai, Beech, cedar, Redwood, Oregon, Huon pine, Tasmanian Oak, Jarrah, Baltic Pine, Oak, Walnut, Teak, Mahogany, veneered surfaces, Ply Wood, Particle Board, Hard Board, MDF, even metal fittings and castings made from Brass, Copper, Stainless Steel, Aluminium, Steel and cast iron.
Economical - Time/Cost Saving
When it comes to time and money the good news is you’re going to save a lot of both! You’ll save time because you’re not going to be sanding and you’ll save money because a little Cooper’s goes a really long way, up to ten times the distance of a regular Paint Stripper.
Any Project
And when we say Interior Stripping we mean your Ceilings, Panelling, T&G Surfaces, Lockwood T&G Pine interiors, Staircase, Mantle Piece, French Doors, Entrance Doors, Villa Door, Bungalow doors, Hollow Core Flat Doors, Door Framing, Architraves, Skirting, Windows of any style, floors, even your Kitchen or bathroom vanity.
Environmentally Safer - Safe Lead Removal
The Cooper’s System does not pollute the environment, being wet and dustless, our specialist masking products completely contain all the old finish being stripped as well as any residual Stripper or Flusher, this means nothing escapes to harm our environment.
Easy to Use - Low Odour - Non Caustic
With Coopers you’ll get the results you always wanted without the pain of sanding, why sand when the person who made your project sanded it for you? Simply dissolve the old finish with Cooper’s Stripper then rinse the surface clean with Cooper’s Flusher.
The Stripper that gets it off everytime!
“After using heaps of other products, once being shown how to use Cooper’s, nothing else comes close”
Simon Kriehn
“If I had to sand, I would have ended up just repainting it all.”
Andrew Hopping
“Once it’s Coopered, it’s done forever. The Shellac surfaces were dark and beaded. Now the smooth, light surfaces are a joy.”
John & Susan Sweetman
“The overall ease of Cooper’s is really good.”
Antony & Jo Wood
Cooper’s Paint & Varnish Stripping Products
No Sanding was required because Cooper’s reuses the sanding that was put there by the person who made the door, it’s that easy!
A T&G door is full of groves, imagine all the time & work it would take to sand
In addition to the physical drama of sanding there's also all that toxic messy dust floating around, getting into everything it shouldn’t
Cooper’s is ideal for a surface that has borer & this door has some borer, see how none of the tracks are opened up to look like an electronic circuit board
See how we polished the door using Cooper’s Moisturiser, a finish that’s like skin care for wood, bringing out the inner glow of the Rimu, its beautiful
Enjoy
Cooper’s Paint & Varnish Stripping Products
No Sanding was required because Cooper’s reuses the sanding that was put there by the person who made the door, it’s that easy!
A T&G door is full of groves, imagine all the time & work it would take to sand
In addition to the physical drama of sanding there's also all that toxic messy dust floating around, getting into everything it shouldn’t
Cooper’s is ideal for a surface that has borer & this door has some borer, see how none of the tracks are opened up to look like an electronic circuit board
See how we polished the door using Cooper’s Moisturiser, a finish that’s like skin care for wood, bringing out the inner glow of the Rimu, its beautiful
Enjoy
Ensuring Your Success
At Cooper’s it is highly important that everyone is successful with their projects. Sometimes when restoring a little professional advice can help. Our support is free, your success is our success.
Online Tutorials
A great way to learn how to use Coopers is to watch our many short length tutorial videos or our real-time videos that show you the actual project being done in real-time so you don’t miss a thing.
Phone Support
NZ 0800 678 678 – AUS 1800 600 616
UK 0808 234 9303 – USA 1833 579 0489 INT +64 6 376 4381
Speak to a Cooper’s expert. Every member of the Cooper’s support team is highly experienced and will be able to help with any questions you have
Email Support
Feel free to contact us and send photos of your project to [email protected]
We also love to see your before and after shots – [email protected]
How to get started
We recommend the ideal way to use Cooper’s is by purchasing a Stripping Pack, a Cooper’s Stripping Pack contains the main products required to give you the No Sanding advantage of the Cooper’s Strip Club.
Buy Online
The Entire Cooper’s Range is available direct to you on this website
Retail Suppliers
Click Here for our list of retail suppliers
Call us Direct
Discuss your project with us.
Call NZ 0800 678 678 or AUS 1800 600 616 or INT +64 6 376 4381
Home Demonstration
(NZ only) If you have a large project e.g. House lot of Windows, Doors, Weatherboards etc, Cooper’s are happy to visit your home for free and show you how to strip the easy way. If this sounds like you, we invite you to call us, discuss your project and arrange a time.
Call 0800 678 678
Customer Feedback
Lockwood
“I have renovated the 1960’s Lockwood home we own in Taupo.
The Cooper’s team did a demonstration there and I was sold!
Their Paint Remover is fantastic and is all it claims to be and more.
Can’t recommend the Products & Services more.
Its great!”
Villa
“Renovated a complete villa using Cooper’s – took the Ceilings + Floors back to natural wood, polished & was amazingly quick,
does what it says on the tin!”
Cedar
“Used this product on cedar & rimu timber inside.
Was amazing & very easy to use, did it all myself. 65yr old female”
The Mega Free Stripper Sale
On Now!
Get 50% Extra Stripper FREE
Ends Midday Friday 31st March
Purchase any size Stripping Pack or Stripper Refill and get 50% Extra Stripper for FREE
Interior Gallery
This video is part of a series that has no edits so you can watch the process at Live Speed
This video is part of a series that has no edits so you can watch the process at Live Speed
Next Step
