Interior Stripping

Has your Interior stripping project turned into a nightmare? Are you frustrated when you crack a window with the heat gun? or after the many hours of surviving the stink and chemical burns from using a regular paint stripper you realise you now need to spend many more dusty hours of toxic sanding to get anywhere near a result you’re happy with, you find yourself wondering why you ever started.

If this is you then welcome to Cooper’s Strip Club, manufacturers and suppliers of what we believe to be the world’s best stripping products, advice & back up support. With Coopers you’ll get the results you always wanted without the pain of sanding, why sand when the person who made your project sanded it for you? Simply dissolve the old finish with Cooper’s Stripper then rinse the surface clean with Cooper’s Flusher. The result is a surface where the character (Patina) remains undamaged, unbleached or removed, which is exactly what a new finish needs if it going to look amazing. The Cooper’s System does not raise the grain due to there being no water in the Cooper’s Products or in the stripping process. Coopers has been used for Interior stripping for nearly 40 years, where you can safely and easily strip Lead Paint, Enamel Paint, Acrylic Paint, Two Pack Paint, Powder Coating, Polyurethane, Moisture Cured Urethane, Lacquer, varnish, Shellac, French Polish, Tung Oil, Danish Oil, Stain, even Floor Glue.

Strip any of these finishes from any solid timber including Kauri, Rimu, Totara, Matai, Beech, cedar, Redwood, Oregon, Huon pine, Tasmanian Oak, Jarrah, Baltic Pine, Oak, Walnut, Teak, Mahogany, veneered surfaces, Ply Wood, Particle Board, Hard Board, MDF, even metal fittings and castings made from Brass, Copper, Stainless Steel, Aluminium, Steel and cast iron. And when we say Interior Stripping we mean your Ceilings, Panelling, T&G Surfaces, Lockwood T&G Pine interiors, Staircase, Mantle Piece, French Doors, Entrance Doors, Villa Door, Bungalow doors, Hollow Core Flat Doors, Door Framing, Architraves, Skirting, Windows of any style, floors, even your Kitchen or bathroom vanity.

The Cooper’s System does not pollute the environment, being wet and dustless, our specialist masking products completely contain all the old finish being stripped as well as any residual Stripper or Flusher, this means nothing escapes to harm our environment. When it comes to time and money the good news is you’re going to save a lot of both! You’ll save time because you’re not going to be sanding and you’ll save money because a little Cooper’s goes a really long way, up to ten times the distance of a regular Paint Stripper. We recommend the ideal way to use Cooper’s is by purchasing a Stripping Pack, a Cooper’s Stripping Pack contains the main products required to give you the No Sanding advantage of the Cooper’s Strip Club. With Coopers you’ll produce a surface that’s Clean, Dry and Absorbent, which is exactly what a new finish needs if it is to survive.

A great way to learn how to use Coopers is to watch our many short length tutorial videos or our real-time videos that show you the actual project being done in real-time so you don’t miss a thing. We also encourage you to send us pictures of your project so that we can advise you on the correct techniques required and the amount of product needed.