NZ 0800 678 678 - AUS 1800 600 616

Marine Stripping

The Stripper that gets it off everytime

Any Paint – Any Varnish – Any Surface

No Sanding – So Easy!

After the many hours of surviving the stink and chemical burns from using a regular paint stripper you realise you now need to spend many more dusty hours of toxic sanding and grinding to get anywhere near a result you’re happy with, you find yourself wondering why you ever started.

If this is you then welcome to Cooper’s Strip Club, manufacturers and suppliers of what we believe to be the world’s best stripping products, advice & back up support.

With Coopers you’ll get the results you always wanted without the pain of sanding, simply dissolve the old finish with Cooper’s Stripper then rinse the surface clean with Cooper’s Flusher.

The result is a surface that’s Clean, Dry and Absorbent, which is exactly what a new finish needs if it is to survive.

The Cooper’s System does not create rust or raise the grain due to there being no water in the Cooper’s Products or in the stripping process.

Coopers has been used for stripping in the marine industry for nearly 40 years, where you can safely and easily strip Lead Paint, Enamel Paint, Acrylic Paint, Two Pack Paint, Powder Coating, Marine Varnish, Two Pack Marine Varnish, Grease, Engine Oil, Etched Primer even Anti Foul.

Strip any of these finishes from Teak, Mahogany, Kauri, Ply Wood, Solid Wood, Brass, Copper, Stainless Steel, Aluminium, Steel, cast iron, Concrete, even Gel Coat.

And when we say Marine Stripping, we mean Yachts, Launch’s, Small Boats, Large Boats, Boat Trailers, Canoes, Brite Work, Hulls, Masts, Interior or Exterior.

The Cooper’s System does not pollute the environment, being wet and dustless, our specialist masking products completely contain all the old finish being stripped as well as any residual Stripper or Flusher, this means nothing escapes to harm our environment.

When it comes to time and money the good news is you’re going to save a lot of both! You’ll save time because you’re not going to be sanding or grinding and you’ll save money because a little Cooper’s goes a really long way, up to ten times the distance of a regular Paint Stripper.

We recommend the ideal way to use Cooper’s is by purchasing the correct sized Stripping Pack for your project, a Cooper’s Stripping Pack contains the main products required to give you the No Sanding advantage of the Cooper’s Strip Club.

With Coopers you’ll produce a surface that’s Clean, Dry and Absorbent, which is exactly what a new finish needs if it is to survive.

A great way to learn how to use Coopers is to watch our many short length tutorial videos or our real-time videos that show you the actual project being done in real-time so you don’t miss a thing.

We also encourage you to send us pictures of your project so that we can advise you on the correct techniques required and the amount of product needed.

Pin It on Pinterest

Share This